|
|
| |
 |
| |
Manufacturers of
Flex Coat
High Build and Lite epoxy rod wrapping finish,
rod builders glue; rod building equipment,
supplies, and "How To" rod building books, fly
and lure finish, and epoxy fly and lure turners.
Flex Coat
is the leader in rod building equipment and
supplies! |
| |
 |
The Small Business Start Up Kit
This kit has the tools, supplies, and instructional materials you need to start
a small business building and repairing custom rods. Earn extra money, keep your
equipment in tip-top shape, and get inside fishing information from your
customers: the expert fishermen who purchase custom rods and have rods repaired
in your shop. You can trade rod repair services or custom rods for fishing trips
with local guides.This complete start up kit will save you $$$. |
 |
Hand Rod Wrapper
This highly versatile rod wrapper is designed to do precision wrapping. With two
tension devices and adjustable thread feed, this is the most popular unit for
custom rod builders. |
 |
Speed Wrapper
Originally designed for commercial rod manufacturers, this smooth operating set
up provides almost effortless wrapping. Cushioned nylon rollers on a polished
steel shaft allow free spinning action with great control. A wrapping control
board with adjustable thread tension and thread feed slides along a 7 ft.
alignment board. |
 |
Power Rod Wrapper
A professional power wrapping machine.
Completely wired with quality motor, variable
speed foot control and a wrapping control board
with adjustable thread tension and thread feed
that slides along a 7 foot alignment board. |
 |
Finishing Motors
High quality USA built gear motors with
self-adjusting chuck for rotating rod while
applying and curing Flex Coat finish. 6 RPM
model for applying finish to rods with
underwraps. 18 RPM is good for general use. 40
RPM is good for faster application. |
 |
Cordless Fly & Jig Turner Big Wheel
This cordless unit with a big 5” foam disk
includes 12 pin clips. The 7 RPM motor (made in
the USA) has an on/off switch and is powered by
4 AA batteries, not included. |
 |
Reel Seat Arbor
Glued in place with epoxy, these lightweight
arbors create a super strong bond between the
reel seat and the rod blank that increases
sensitivity. The arbor is a solid, semi-porous
polyurethane material that is machined to fit
most sizes of reel seats and can be turned down
to fit between sizes. All arbors have a 1/4”
inside diameter pilot hole which can be easily
reamed or drilled out to fit any rod blank. |
 |
Pilot Drill Bits
The pilot drill bit guides itself through a
pre-existing hole in order to increase the
diameter. These tools are made from spade bits
with an aluminum pilot on the tip. When used
with a hand drill the result is a perfectly
centered hole. Flex Coat Pilot Drill Bits are
available in 5/16”, 3/8”, 7/16”, 1/2”, 9/16”,
5/8” & special order sizes. |
|
|
|
