Links
    Home
    Sponsors
    Forums
    Product Reviews
    NEOTF Contributors
    Fly Fishing Guides
Freshwater Information
    Articles
    Freshwater Species
    Entomology
    Hatches
    Nymphing
    Temp. Chart
Saltwater Information
    Articles
    Saltwater Species
    Tides
Beginners Corner
    Fly Fishing 101
    Fly Rods
    Fly Reels
    Fly Lines
    Leaders
    Knots
    Casting
    Catch & Release
Resources
    Maine
    New Hampshire
    Vermont
    Massachusetts
    Rhode Island
    Connecticut
    All States
    Cooking
    Fly Tying
    Weather Radar
    Announcements
New England On The Fly
    Contact Us
    Online Store
    Free Drawing
    Facebook 
    Sponsors 
 
 
Fly Lines

There are so many fly lines on the market to choose from. First you should know that there are three types of fly lines.

Floating-which means just that, your line will float on top of the water.
Intermediate Sinking-which means your line will be suspended just under the surface.
Sinking-your line sinks according to lines sink rate.




Next there are three tapers of fly lines.

Weight Forward- Most of the weight of the line is in the front section. Allowing you to cast further.
Double Taper- The line actually tapers on the front and rear sections of the line. Which means that the thickest part of the line is in the middle. Makes it economical since you can use the other end of the fly line once your front section gets worn from adding and removing your leader. Just cut the line at the backing and use that section as the front. DT lines are also ideal for roll-casting.
Level- The line is just a straight line with no taper.


Next you will need to choose a proper weight of fly line. Something you learned in the Fly Rod Selection section. As far as colors go that is entirely up to you. Although it is easier for a fish to spot a chartreuse colored line than a white one. So if you were looking for a weight forward, floating, 6 weight line look like? WF6F




To care for you fly line always remember to fully dry your line before putting it back into it's case, otherwise it may get moldy. You will need to wash the line often especially if you will be using a floating line. Algae will stick to your line and cause it to sink. Simply rinse your line with mild detergent or better yet try using a fly line cleaner, since it will also add some lubricant to your line. A slick line is an easy line to cast. Never use a vinyl cleaner since it will eventually eat your line. Remember UV rays from the sun and high heat can destroy your line.





For instructions on rigging please check the Knots section.